Hide or Conceal a Plug In Vehicle Tracker with a Y Cable Splitter

Follow

Use a Y Cable Splitter (available from Btracking, see Accessories page) to hide or conceal a BTL3030 OBD II plug-in tracker. It takes about 10 minutes to install and is easy to do yourself. To install a Y Cable, follow the guide attached to this article.

Pop the vehicle's OBD II connector out of its bracket and connect the Y Cable Splitter. One side of the Y Cable is an open OBD II port. Insert that into the bracket. Plug the GPS Vehicle Tracker into the other side of the Y Cable and conceal it behind the dash secured with cable ties.

To order a Y Cable Splitter contact Btracking via Chat/Help or email support@btracking.com

Have more questions? Submit a request

Comments