When vehicle ignition is turned on or the GPS tracker is otherwise powered up, the small LED lights on the unit will blink. Once the lights stay lit without blinking, the unit should be reporting on the mapping platform. During the initial installation, it may take the tracker up to 15 minutes to initialize and appear on the mapping platform.
Trackers units may have up to three LEDs: RED for Ignition State, ORANGE for Comm (wireless network communication) state, and GREEN for GPS state.
The red LED turns on momentarily at powerup or wakeup, after which the red LED is only on when the ignition is on.
The other two LEDs behave as follows:
Orange LED (Communication) Status
| Condition | Orange LED |
| Modem Off | Off |
| Communication On - Searching | Slow Blinking |
| Network Available | Fast Blinking |
| Registered but no Inbound Acknowledgement | Alternates from Solid to Fast Blink every 1 sec |
| Registered and Received Inbound Acknowledgement | Solid |
Green LED (GPS) Status
| Condition | Green LED |
| GPS Off | Off |
| GPS On | Slow Blinking |
| GPS Time Sync | Fast Blinking |
| GPS Fix | Solid |